Fixture types for your markilux awning:
Have markilux awnings installed - all fixture types at a glance
Face fixture, top fixture, clamp fixture or roof fixture - these are just some of the options for fusing markilux awnings. The fixture type depends not only on the architectural conditions of your patio or balcony, but also on the awning model selected.
In addition, the respective climatic conditions are also taken into account during professional awning fixture by your markilux authorized dealer: In regions where there is likely to be a lot of wind, only awning models with the appropriate wind stability will be installed.
You will find the right awning for every installation situation in the large markilux range. You are also welcome to contact your regional specialist awning dealer directly to find out how you can have your new markilux awning installed.
Installing lateral arm awnings
The markilux lateral arm awnings are characterized by a high degree of flexibility when it comes to fixture. Many models can be installed on the face, rafters or top fixture.
- Wall/surface mounted: Wall/surface mounted is the most common way of attaching a lateral arm awning. In this case, hardware materials are inserted into the substrate and the awning is firmly screwed in place. If the awning is to be attached to an insulated façade (thermal insulation system), special hardware materials are used to prevent the formation of thermal bridges. The wall/surface mounted version is available for all markilux lateral arm awnings.
- Roof and top fixture: If it is not possible or practical to attach the patio or balcony awning to a face, there is also the option of attaching an awning to the ceiling or roof. Special brackets are attached directly to the top. Fixture to rafters is also possible for many models, provided they are load-bearing.
- Recess mounted application: Some balcony and patio awnings can be recess mounted if the installation space is limited. In this case, the awning is recessed into existing or newly created niches and visually blends in with its surroundings when retracted.
- Clamp mounting: This fixture type is characterized by its uncomplicated installation, ideal for rented apartments or places where structural changes are undesirable. This innovative installation solution is currently available exclusively for the markilux 900 model. The awning is clamped between the floor and the top or top of the balcony using clamp-in posts, enabling a fixed and secure installation with fewer holes than conventional methods. This method allows a flexible and reversible fixture that still provides stable solar protection.
Fixture of pergola awnings
markilux pergola awnings combine robust solar protection with elegant design. However, perfect function and longevity depend largely on the correct fixture. We offer various installation options to meet your individual needs and adapt the fixture to the local conditions.
- Face fixture: With face fixture, the robust construction of the markilux pergola awnings is fixed directly to the façade of your building. This method offers very stable and secure anchoring, as the forces are transmitted directly into the building structure.
- Top fixture: In situations where face fixture is not possible or desired, the pergola awning can also be mounted on a stable ceiling structure. This is the case for covered terraces or balconies, for example.
- Roof mounting: Roof mounting, often a specialized variant of wall/surface mounting, allows the pergola awning to be attached directly to the rafters or the roof structure. It is particularly suitable for structural conditions where conventional face fixtures are difficult or impossible.
- Awning installation with ballast boxes: If the posts of an awning system cannot be fixed to a foundation, it is also possible to use ballast boxes for some models. These anchor the free-standing awning firmly to the ground. To ensure a solid base, the metal boxes are filled with gravel sand.
Fastening options for glass canopies and skylight/sunroom awnings
markilux above-glass and underglass awnings offer tailor-made solar protection for conservatories, patio roofs and glass canopies. Choosing the right fixture type is crucial for optimum functionality and durability. We explain the differences and advantages of overglass and underglass fixtures.
- On-glass installation: Are you looking for optimum solar protection for your conservatory or glass canopy? With above glass installation, we place your markilux awning directly on the glass surface. This fixture type is ideal if you prefer an unobstructed view to the inside or if structural conditions do not permit underglass installation. Your advantage: the sun's rays are intercepted before they hit the glass, so that your interior remains pleasantly cool.
- Underglass installation: Enjoy a perfect indoor climate under your glass roof with a markilux underglass awning. With this fixture type, the awning is fitted directly below the glass surface. This means double protection: your awning cover is protected from the weather and your conservatory remains pleasantly cool even on hot days. In addition, coarse soiling is kept away from the fabric cover. So you can sit back, relax and enjoy the sunny days.
The fixture types of our freestanding markilux systems
Are you dreaming of flexible shade solutions that are independent of your house façade? The freestanding markilux markant, markilux syncra and markilux planet awning systems open up completely new possibilities for designing your favorite outdoor space. Whether in the middle of the garden, on the roof terrace or by the pool - we offer various fixture types to meet your individual requirements.
- Concrete foundation: The most stable and secure method of anchoring your freestanding awning. Concrete foundations are poured into which the posts of the awning structure are firmly anchored. This ensures maximum wind stability and a permanent installation.
- Wall connection: For some freestanding models, especially when placed close to a house wall, a wall connection can serve as an additional or primary fixture. In this case, one side of the awning construction is firmly anchored to the house wall, providing additional stability.
- Ballast boxes: A flexible solution if fixed foundations are not desired or possible. The posts of the awning are inserted into special boxes that are filled with heavy material such as gravel or sand. This provides sufficient weight and stability, but also allows the awning to be repositioned more easily if necessary (depending on the model).
Awning to clamp - the markilux drop-arm cassette awning
If you want a window or balcony awning that can be installed without drilling, we recommend the markilux 730 drop-arm cassette awning. You can optionally order this awning model as a "clamp" awning.
